Is a side-mount mixed gas rebreather made in durable and user-friendly design offering flexible configuration, exceptional reliability, world class robustness and very easy maintenance.
Click on each part to see more details.
TOP HEAD
It is equipped with hose connectors on the upper side and the Counterlungs connectors on the underside. The connectors have the unique bayonet Click-Locks with different keying on each connector preventing incorrect connection of the breathing
loop.
FASTENING EYE
The Upper Canister is equipped with a fastening eye with easy relocation. More hanging eyes can be added to the Upper Canister as needed by the diver.
OXIGEN MAV
The Oxygen MAV is attached to the LP hoses and placed loosely along the Upper Canister or is optionally bolted directly to the Upper Canister in a defined position.
OVER PRESSURE VALVE
The exhalation counterlung is equipped with an adjustable over pressure/dump valve allowing to drain eventual water easily. The over pressure / dump valve can be operated manually by pulling the string.
OXY CYLINDER 2L
CCR HEAD
The CCR head is the heart of the FLEX2, which contains the control electronics, the solenoid valve for controlled dosing of oxygen, the removable Cartridge carrying three oxygen sensors, two replaceable Li- Ion batteries 18500, watertight connectors for connection of external computers as well as connectors with unique Click-Lock bayonets for easy and fast connecting of the Counterlungs.
CLOSING LATCHE
HEAD-UP DISPLAY
The main feature of the Head-Up Display (the HUD) is to show the current status of ppO2 in the breathing loop as well as ppO2 alarms to the diver.
The HUD has wet contacts for automatic turning on when entering water.
The HUD is power supplied by the battery #2 in the CCR head.
SCRUBBER CANISTER
The Scrubber Canister is made of durable Delrin tube and has a mounted bottom with a small water trap.
The bottom has a lower protective ring made of stainless steels, which can be replaced if damaged.
PETREL CONTROLLER
The Primary Controller Handset is connected to the control electronics in the CCR head via a robust, durable and very flexible cable with the X-connector, made of AISI 316L rated up to 300m depth and marked with a GREEN ring.
SM BOV NEO
SM BOV Neo is a Bail-out Valve with a 2nd stage regulator incorporated into the mouthpiece with
the ability of supplying the diver with open circuit breathing gas when needed.
BREATHING HOSE
Breathing hoses are connected to the SM BOV via the unique and secure Click-Lock Bayonet Connectors. It is impossible to connect the breathing hoses incorrectly due to different keying on each bayonet connector on the loop.
BOV SHRIMP
EXHALE HOSE
L-PIECE
FX CASE
OVER PRESSURE & DUMP VALVE
1ST STAGE REGULATOR SET AT 6,5 BAR
CF CYLINDER 2L/300BAR
PETREL 3 CONTROLLER
QC-6 CONNECTOR
DIL MAV
ADV SHUT-OFF
ADV L-PIECE
INHALE HOSE
HUD
The FX-CCR is a chest-mounted mixed gas close circuit rebreather with electronic ppO2 control and full
Trimix decompression.
The FX-CCR combines a well proven rebreather design with the most innovative electronics package to
form a fault tolerant rebreather.
The most important features of the FX-CCR are very low weight, user-friendly design with tool-less
assembly and maintenance, variable configurations, flexibility and reliability.
Click on each part to see more details.
Web Design by BRO Media